Plant & Ductwork Protection

Plant and equipment also needs protection from potential vehicle impacts and proper risk assessments should be carried out in all cases to ascertain the likely danger and potential speeds of vehicles involved. Berry Systems can help and advise in these circumstances and recommend either standard products from the Berry Systems range or design bespoke solutions (see Bespoke Page).

» GH Spring Steel Buffers

Max Post Centres: 1600mm Barrier Rail 1500mm Berry Beam

Standard Height: 610mm (760mm for HGV applications)

No of fixing bolts: 2

A strong, adaptable multi-purpose system that can take blows at up to 10mph either head on or at glancing angles, depending on the vehicle type. It absorbs the impact energy using the unique properties of the spring steel. This means less damage to the structure or plant and whole life cost savings compared to traditional rigid solutions.

» Flexi-Posts

Max Post Centres: 1600mm Barrier Rail 1500mm Berry Beam

Standard Height: 610mm (760mm for HGV applications)

No of fixing bolts: 4

Where impact is potentially at higher speeds than those required by BS6399 then the Flexi-Post is an ideal solution. It is designed to take regular light knocks as well as single heavy impacts from various angles. Strength can be further increased in high risk areas by reducing post centres.

» Rigid Posts

Max Post Centres: 800mm Open Box Beam

Standard Height: 610mm (760mm for HGV applications)

No of fixing bolts: 4

Where minimal deflection is essential a combination of Rigid P224 Posts and Open Box Beam at 800mm post centres will provide a very good level of protection. However, significantly increased load is transferred into the structure compared to flexible solutions.