Column & Pipework Protection Systems

Supporting Columns are highly vulnerable to damage from vehicle traffic. Repairs can be costly and, in the worst cases, could affect the structural integrity of the car park with far reaching consequences. Exposed pipework and lighting columns are also highly vulnerable and can not always be placed in traffic free areas. All Berry Systems’ column protection products cater for various sizes and can be tailored to your precise needs.

» Column Buffa Plus

Stronger than the standard Column Buffa these are available in full or semi-circle units and are recommended to be double height. The spring steel buffers, combined with enclosed semi-circles offer strong protection from vehicles at low speeds.

The feet can also be turned inwards to prevent a trip hazard or damage to tyres. Minimum size is 500mm internal diameter.ms’ column protection products cater for various sizes and can be tailored to your precise needs.

Column Buffa Plus Full Circle

Column Buffa Plus Half Circle

» Column Buffa

A light and economic monostrut system which offers protection from cars at low speeds.

It can be radiussed as low as 200mm and is suitable for both interior and exterior use.

Column Buffa Full Circle

Column Buffa Part Circle
(Powder Coated)

» I-Beam Protectors

Berry I-Beam Protectors are mounted directly to an I-Beam column and so require no foundations or footings. They are ideal for use where ground conditions are not suitable for conventional Column Buffas. The steel mountings absorb some of the impact forces and so protect the I-Beam from major damage. Available in full circle or semi-circular options, I-Beam Protectors can also guard any service pipes or ducting running down the beam provided sizes and locations are advised in advance so that the fittings can be customised to accommodate this requirement.

I-Beam Protectors

» Column Corner Guard

These Rubber Buffas are for use when the impact is likely to be brushing or scraping the column rather than head on impacts. 1200mm height.

Column Corner Guard

» Corner Fender

The Corner Fender is an alternative to the Column Corner Guard and is supplied in standard 1m lengths.

It features high visibility yellow strips on both sides.

Column Corner Fender