- - - - - - -
- Berry Systems - car park safety barriers and speed control - -
- Click HERE for
Car Park Products Range
- -


T: +44(0)1902 491100
F: +44(0)1902 494080
Email: Click

Assessed Materials



Column, Plant and Pipework Protection

Supporting columns are highly vulnerable to damage from factory traffic. Damage repairs can be costly and in the worst cases can affect the structural integrity of the building with far reaching consequences. All Berry Systems column protection products cater for various sizes and can be tailored to your precise needs.

Column Sentry

Made from semi-flexible and stress crack resistant plastic, the Column Sentry uses an air cushion system that is designed to absorb impact time after time. Twenty four air pockets let out the energy of any impact away from the column.

Available in almost any size, it can be installed in seconds and is in high visibility yellow. Column Sentry is also waterproof and chemical resistant.

Bronze Protection Level

Column Sentry
Column Sentry
 

Column Buffa

A light and economic system which offers protection against small pallet movers at low speeds. It can be radiussed as low as 200mm and is suitable for both interior and exterior use. It can also be supplied to protect against air-ducts and drainpipes in a space efficient manner.

Bronze Protection Level

Column Buffa
Column Buffa
 

I-Beam Protectors

Berry I-Beam Protectors are mounted directly to an I-Beam column and so require no foundations or footings. They are ideal for use where ground conditions are not suitable for conventional Column Buffas. The steel mountings absorb some of the impact forces and so protect the I-Beam from major damage. Available in full circle or semi-circular options, I-Beam Protectors can also guard any service pipes or ducting running down the beam provided sizes and locations are advised in advance so that the fittings can be customised to accommodate this requirement.

Bronze Protection Level

I-Beam Protector
I-Beam Protectors
I-Beam Protector
 

Column Corner Guard

These Rubber Buffas are for use when the impact is likely to be brushing or scraping the column rather than head on impacts. 1200mm in height.

Bronze Protection Level

Column Corner Guard
Column Corner Guard
 

Column Buffa Plus

Stronger than the standard Column Buffa these are available in full or semi-circle units and are recommended to be double height.

The spring steel buffas, combined with the enclosed semi-circles offer strong protection from Fork-Lift Trucks at low speeds. The feet can also be turned inwards to prevent a trip hazard or damage to tyres. Minimum size is 500mm internal diameter.

Silver Protection Level

Column Buffa Plus
Column Buffa Plus
 

Heavy Duty Column Buffa

These are used when surrounding large columns or objects to make then virtually impenetrable. The 5mm wall thickness of the Box Beam Barrier and the flexible steel buffa supports will withstand considerable impacts.

Gold Protection Level

Heavy Duty Column Buffa
Heavy Duty Column Buffa
 
The look you want. The protection you need.